We Connect 2024 We Connect 2024

Pyro 7 Support

To import a LUT file to the Pyro 7, please follow the appropriate instructions.

Please follow the steps below to import a 3D-LUT file (.cube) to your Pyro 7 using a USB disk or SD card: 1. Format the USB disk to FAT32.
2. Copy the 3D-LUT file to the USB disk.
3. Connect the USB disk to the USB-C interface of the Pyro 7 or insert the SD card.
4. Click on the LUT icon and select LUT Import.
5. Select the corresponding LUT file and import it to F1-F5. The imported LUT will replace the current LUT in F1-F5. Note: The Pyro 7 supports LUTs with LUT_3D_SIZE of 16/17/32/33/64/65.

 

Up to 40mins for single time and total around 10 hours with 32Gb SD card.

This function needs to turn on the HDMI recording control on camera.
Once the cameraman starts/stops recording,this action will be synchronized with Pyro 7 to start/stop recording accordingly.
And this trigger could also be synced to the app and receiver(the trigger should be turned on).

Overviews: Pyro 7 supports 4K input. However, when receiving a 4K input from the camera via HDMI, the display output on the monitor will be scaled down to 1080p resolution, and only a 1080p signal will be transmitted.

  • Pyro 7 supports input of up to 4K30 resolution. However, the screen display is limited to 1080p resolution, and as a transmitter, it can only transmit a maximum resolution of 1080p.
  • When 4K30 signal is input through HDMI IN, the device can loop out the same 4K30 signal through HDMI OUT.